Rising to a whole new level of field proven pump control,
reliability, flexibility and ease of operation.
EG Controls specializes in the manufacture of pump controls for the water and wastewater industries. Dedication to product quality, innovative
technology, competitive pricing and total responsiveness to customer needs, have made EG Controls a nationwide industry leader for over 30 years.
EG Controls’ products withstand the test of time, saving money by improving efficiency and decreasing downtime. Designated for easy use in the
field, EG Controls’ products deliver absolute reliability combined with strong price value.
Based in Jacksonville, Florida, EG Controls is a UL508 manufacturing facility staffed by experts in the design and manufacture of pump controls.
PPE is pleased to offer the Digi Gage series of controls from EG Controls!
Model 2300 is designed to handle up to three
pumps and should be used in duplex or triplex
stations.
Model 2400 is designed for use with triplex or
quadruplex stations and can handle up to four
pumps.
Model 2600 is the most versatile and can
handle up to six pumps
The Vari-Gage 3300 Model is designed to
handle up to three variable speed pumps
The Digi Gage
Control System
The Digi-Gage is a compact, programmable
level indicator controller designated for water
and wastewater applications.
It will automatically start, stop and alternate
up to six pumps to precisely monitor and
maintain fluid levels.
Most importantly, the Digi-Gage is one of the
most reliable controllers on the market today.
It is 100% digital so it eliminates all of the
conventional sources of dirt and error. Four
different models are available to handle a
variety of pumping station sizes and needs.
EG Controls continues to lead the market
in new products designed with the
operator’s needs in mind. The Digi-Gage is
built with a draw out case to make
installation and replacement easy – no
wires or pneumatic connections to
disconnect.
EG Controls' innovative products include lift
station controllers, float panels, PLC
controls, electrogage bubbler systems,
bubbler air monitoring systems, variable
frequency drive systems, pressure switch
systems, transducer based systems, fresh
water booster systems, energy information
and control systems
for more information on Digi
Gage Control Systems from EG Controls
All Digi-Gage models can be configured for Pump Up (freshwater)
or Pump Down (wastewater) applications.
Accepts pressure, voltage or current input…
With a proven track record, the Digi-Gage can be used in almost any application. Not only will it accept bubbler pressure input but it can also
accept 4-20mA and 0-10 volt inputs from any type of level transmitter. After being “read” by the Digi-Gage, all inputs are converted into feet or
psi by the internal microprocessor and then displayed in bright ½” LED’s.
Provides a gateway for implementing a SCADA system…
The Digi-Gage unit can serve as an RTU interface and can actually be the direct connection to a computer or provide data to a PLC which will
then communicate with a remote monitoring computer system. Communications capability is standard for all Digi-Gage and Vari-Gage models.
Each unit comes with a built-in RS 232 Modbus card. Combine the Digi-Gage with EG Controls’ Scada Express software for a complete
SCADA system with “off the shelf” pricing and convenience.
Output meets all industry standards…
Along with standard digital output, the Digi-Gage also has a user scalable 4-20mA output that can be used to control recorders, chemical
pacing equipment and more. The sister product, the Vari-Gage, has been designed to be used with up to three variable frequency drives. The
Vari-Gage has three 4-20mA analog outputs. Automatic purge control is standard with models 2300 and 2400.
Manual simulation (SIM) can be used for testing…
With the SIM mode, an operator can simulate changes in either liquid level or pressure. Upon entering the SIM mode, the Digi-Gage will first
store the value of the actual level being monitored. Alarms and pumps will operate based on simulated value changes (such as level or
pressure) accomplished by the operator pressing the UP and DOWN arrow keys. If no key is pressed, the system will revert to automatic
operation after three minutes.
Program the Digi-Gage in four east steps…
First press PROG to select programming mode. Second, press the STEP key to select the function to be reviewed or changed. A discrete LED
on the controller’s right side indicates each function as it is selected and the display indicates the current value being stored. Third, use the UP
and DOWN arrow keys to change the value settings. Finally, press AUTO to save settings and put system in automatic mode. The entire
programming sequence can be completed in minutes. Changes and deletions can also be made by touching a few buttons.
Easy to program and calibrate – no need to call for field service
Reliable and self maintaining…
In case of power failure, programming is also saved in special NOVRAM “100 year” memory without the use of batteries. A self diagnosing
memory test is automatically run each time the unit is turned on
Please contact us for more information on how the Digi Gage series of controls from EG Controls can be utilized to meet your specific
operating requirements.
Contact PPE
The right pump for your application needs
Locations
Houston / 713-783-8530
Beaumont / 713-783-8532
Austin / 512-595-4501
Pump & Power Equipment
San Antonio / 210-781-9067
McAllen / 956-668-7867
Corpus Christi / 210-781-9067
© 2011 Pump & Power Equipment, all rights reserved
Pump & Power Equipment...The right pump for your application needs
EG Controls & Digi Gage
Model 2300 is designed to handle up to three
pumps and should be used in duplex or triplex
stations.
Model 2400 is designed for use with triplex or
quadruplex stations and can handle up to four
pumps.
Model 2600 is the most versatile and can
handle up to six pumps
The Vari-Gage 3300 Model is designed to
handle up to three variable speed pumps
The Digi Gage
Control System
The Digi-Gage is a compact, programmable
level indicator controller designated for water
and wastewater applications.
It will automatically start, stop and alternate
up to six pumps to precisely monitor and
maintain fluid levels.
Most importantly, the Digi-Gage is one of the
most reliable controllers on the market today.
It is 100% digital so it eliminates all of the
conventional sources of dirt and error. Four
different models are available to handle a
variety of pumping station sizes and needs.
EG Controls continues to lead the market
in new products designed with the
operator’s needs in mind. The Digi-Gage is
built with a draw out case to make
installation and replacement easy – no
wires or pneumatic connections to
disconnect.
EG Controls' innovative products include lift
station controllers, float panels, PLC
controls, electrogage bubbler systems,
bubbler air monitoring systems, variable
frequency drive systems, pressure switch
systems, transducer based systems, fresh
water booster systems, energy information
and control systems
for more information on Digi
Gage Control Systems from EG Controls
All Digi-Gage models can be configured for Pump Up (freshwater)
or Pump Down (wastewater) applications.
Accepts pressure, voltage or current input…
With a proven track record, the Digi-Gage can be used in almost any application. Not only will it accept bubbler pressure input but it can also
accept 4-20mA and 0-10 volt inputs from any type of level transmitter. After being “read” by the Digi-Gage, all inputs are converted into feet or
psi by the internal microprocessor and then displayed in bright ½” LED’s.
Provides a gateway for implementing a SCADA system…
The Digi-Gage unit can serve as an RTU interface and can actually be the direct connection to a computer or provide data to a PLC which will
then communicate with a remote monitoring computer system. Communications capability is standard for all Digi-Gage and Vari-Gage models.
Each unit comes with a built-in RS 232 Modbus card. Combine the Digi-Gage with EG Controls’ Scada Express software for a complete
SCADA system with “off the shelf” pricing and convenience.
Output meets all industry standards…
Along with standard digital output, the Digi-Gage also has a user scalable 4-20mA output that can be used to control recorders, chemical
pacing equipment and more. The sister product, the Vari-Gage, has been designed to be used with up to three variable frequency drives. The
Vari-Gage has three 4-20mA analog outputs. Automatic purge control is standard with models 2300 and 2400.
Manual simulation (SIM) can be used for testing…
With the SIM mode, an operator can simulate changes in either liquid level or pressure. Upon entering the SIM mode, the Digi-Gage will first
store the value of the actual level being monitored. Alarms and pumps will operate based on simulated value changes (such as level or
pressure) accomplished by the operator pressing the UP and DOWN arrow keys. If no key is pressed, the system will revert to automatic
operation after three minutes.
Program the Digi-Gage in four east steps…
First press PROG to select programming mode. Second, press the STEP key to select the function to be reviewed or changed. A discrete LED
on the controller’s right side indicates each function as it is selected and the display indicates the current value being stored. Third, use the UP
and DOWN arrow keys to change the value settings. Finally, press AUTO to save settings and put system in automatic mode. The entire
programming sequence can be completed in minutes. Changes and deletions can also be made by touching a few buttons.
Easy to program and calibrate – no need to call for field service
Reliable and self maintaining…
In case of power failure, programming is also saved in special NOVRAM “100 year” memory without the use of batteries. A self diagnosing
memory test is automatically run each time the unit is turned on
Please contact us for more information on how the Digi Gage series of controls from EG Controls can be utilized to meet your specific
operating requirements.
Contact PPE
The right pump for your application needs
Locations
Houston / 713-783-8530
Beaumont / 713-783-8532
Austin / 512-595-4501
Pump & Power Equipment
San Antonio / 210-781-9067
McAllen / 956-668-7867
Corpus Christi / 210-781-9067
© 2011 Pump & Power Equipment, all rights reserved
Pump & Power Equipment...The right pump for your application needs